Radiator Sizing Guide: Heat Loss and Rated Output
Choosing a radiator involves matching its heat output to the room and the heating system. Physical width and height alone do not establish whether it will keep a room comfortable. This guide explains how to interpret an initial estimate, what a detailed heat-loss assessment adds and how to compare manufacturer output figures.
Heat output and heat loss are different
Radiator output is a rate of heat delivery. It may be shown in watts, kilowatts or BTU per hour. One kilowatt is 1,000 watts and approximately 3,412 BTU/hr. These units describe output, not the radiator's dimensions or the amount of energy your heating will consume over a year. Stelrad explains output units. Heat loss describes heat leaving the room under the assumed design conditions. MCS explains that an assessment considers the building fabric, room dimensions, ventilation, intended indoor temperature and outdoor design temperature. Rooms with the same floor area can therefore need different outputs.
Use the quick estimate as a starting point
Our radiator output estimator uses room volume multiplied by 153, then applies selected room, window and position factors. It rounds to the nearest 50 BTU/hr and converts the rounded figure to kW. The factors are this tool's simplifying assumptions, not an approved heat-loss design method. Measure length, width and floor-to-ceiling height in metres. Choose the options that best describe the room, then record the inputs with the result. The tool does not separately assess insulation, each external surface, air leakage or local winter design conditions. It does not select a radiator model or confirm an installation design.
Two worked examples from this tool
Example 1: living room. A room measuring 4 × 3 × 2.4 m has a volume of 28.8 m³. Select Lounge/living room (factor 1.0), double glazed small windows (0.9), and heated rooms above and below (0.95). 28.8 × 153 × 1.0 × 0.9 × 0.95 = 3,767.472 BTU/hr. Rounded to the nearest 50, the displayed estimate is 3,750 BTU/hr, or 1.10 kW. Example 2: bedroom. A room measuring 3 × 2.5 × 2.4 m has a volume of 18 m³. Select Bedroom (0.9), the same small double-glazed windows (0.9), and heated rooms above and below (0.95). 18 × 153 × 0.9 × 0.9 × 0.95 = 2,119.203 BTU/hr. The displayed estimate is 2,100 BTU/hr, or 0.62 kW. These examples demonstrate the tool's arithmetic; they are not typical requirements for every UK living room or bedroom.
Compare output at the intended temperatures
The same radiator gives different outputs at different water temperatures. Manufacturers may quote a temperature difference, written as delta T or Δt, between the circulating water and the room. A catalogue figure at one condition cannot be treated as the output at every condition. Ask for the exact model's output at your proposed system temperatures. Stelrad's guidance explains this distinction. This matters when considering a heat pump or another system change. Existing radiators should be assessed for the proposed operating conditions; neither “all radiators must be replaced” nor “all will be suitable” follows from a quick room-volume estimate. Discuss future system plans before ordering replacements.
What to request from a heating professional
Ask for a room-by-room assessment and an explanation of the assumed indoor and outdoor temperatures. Energy Saving Trust's guidance describes the information needed for detailed heat-loss calculations and the importance of a survey for an existing property. For a radiator quote, request the model, dimensions, stated output at the design conditions, proposed positions and included installation work. Ask how available wall space, pipework, valves and controls affect the design. Where more than one radiator is proposed, discuss heat distribution as well as combined output.
Find help with sizing or replacement
See our radiator repair and replacement guide, then browse profiles in Wolverhampton, Leeds, Sheffield, Bristol, Cardiff, Nottingham and Stoke-on-Trent. Confirm the service and postcode coverage directly. Read how to use this directory before choosing a business; a listing is not a qualification check. Last updated: 10 October 2026. This guide is general information. It is not a survey of your home or a claim of independent technical review.